• 목록
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC windows are a great choice for modern homes. They are easy to maintain, durable and long-lasting. In contrast to aluminium and timber, they do not corrosion or rot.

It is important to clean and oil UPVC windows and doors regularly. This will reduce repair costs as well as improve the efficiency of energy.

1. Broken Glass

The broken glass in your windows could cause severe damage to your home, and could even be fatal. It is important to take the time to ensure that you're doing all you can to keep your windows in good shape.

Single-pane windows are fairly simple to replace, and they will usually fit into the frames of the past easily. If you have double-paned windows which are joined by internal beading, it is difficult to remove and replace the panes that were previously in use. In this case you'll need find some plastic spacers that help the new pane to fit perfectly into the frame of the window.

If you plan to try to remove the window panes yourself it is crucial to wear the proper safety gear, including thick gloves and protective eyewear. It is also an excellent idea to lay down a drop cloth before you start working on the glass to ensure that any shards will fall on the fabric instead of onto the floor where they could be trampled upon and cause further damage.

Once the glass has been removed from the window, it's best to seal the gap with packaging tape or duct tape to stop water and drafts from getting into the property until a professional is able to come out and repair the window. It also acts as a barrier, deterring any intruders from getting access to your home. If the gap between the door and the window is significant, you may want to use an alarm system that has windows. This will provide the best of both.

2. Sagging

Upvc windows and doors are an affordable energy efficient, durable and long-lasting alternative to timber windows with sash. In time, they could develop a variety of issues, including sagging. A sagging uPVC windows can cause problems with light, draughts and even security. If you notice that your uPVC window is beginning to shrink, it is important to act swiftly to prevent the problem from becoming worse.

Repositioning the hinges could aid in fixing a window that is sliding. You'll first need to open the windows to get at the frame. Then, remove both the top and bottom hinges using a screwdriver, and then adjust them counter-clockwise or clockwise. Close your window to test the fit after you have moved your hinges. If you're satisfied with the fit of the window, you can tighten screws to keep them in place.

If you aren't able to move the hinges, you may require replacing the seal. Rubber seals can dry out and lose their elasticity over time, causing them to lose their tightness. If this happens, it's crucial to replace the seal as soon as you can to ensure that your upvc window Repair windows are watertight and secure from draughts.

UPVC handles can also become loose. The majority of the time, this is caused by screws that have become loose over time. However, it can occur because the handle mechanism has been worn out. Fortunately, it's easy to fix a loose uPVC window handle yourself. First, you'll need to close the window and then perform an experiment to ensure that it fits. The corners of the sash should align with the casing joint. If it doesn't, you can use the screwdriver to loosen up the handle. Then turn the mechanism back into place.

3. Water Leaks

If you're waking up to wet floors and damp walls each time it rains it is important that you take action. Leaks of water from windows can cause structural damage to your home and hinder your ability to control the temperature of your home. The most frequent reason for leaking uPVC windows is that the sealant surrounding the frame is either damaged or not present.

This is an easy fix that can be done by any DIYer who is competent. Depending on how serious the problem is, the old caulking may need to be removed. It is crucial to keep in mind that when it is about uPVC window repairs you should avoid the temptation to "over-caulk and then make the area more difficult to clean and reduce the efficiency of your energy.

Check that any drainage holes have no debris inside them and ensure that the sill pan is properly angled to drain away from the window. In more extreme cases, you may need to replace the window.

Moldy sills and rotten ones are also signs of water leakage. This fungus thrives under conditions of dampness and can spread quickly throughout the home.

If the leakage occurs between the double glazed window repairs near me-glazed glass, it is more likely that the issue is more with the seal rather than the frame. A uPVC specialist can easily solve this issue by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

Hinges may be to blame if your uPVC window is difficult to open or it opens in a breeze. Any competent DIYer can replace these in a matter of minutes.

Like all mechanical parts hinges will be damaged over time. Changing a window hinge is essentially a very simple process but it can be simpler with someone else to help you hold the frame up.

Make sure that the uPVC hinges are open and closed in the right direction. You can check this by looking for the arrows on each hinge, this indicates which way the window should be opened.

The problem with the hinges on windows can be caused by incorrectly opening the window a certain way or by inadequate installation at the factory. It is usually possible to fix the issue by sending us a picture through our website and we will be happy to give you advice.

Regularly lubricating the hinges is also necessary. Applying a light engineering lubricant on the hinges is an ideal method of doing this. We suggest using the lubricant that doesn't contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication can allow the window open and close more easily. It also helps prevent corrosion and decrease the chance of sticking. It is recommended to do this at least once a year. WD40 or other solvent-based oils are not recommended as they could damage your uPVC windows.

5. Draughts

Draughts can be caused by several different causes. The hinges, also due to wear and tear can become misaligned, this will cause an opening to appear between the sash and the frame. They can be repaired by giving them a good cleaning, but if they are beyond repair it could be necessary to have them realigned or replaced. The second is the interlock, which is located on the hinge of the window, can also become misaligned, again it may be possible to give them a clean but in some instances it could be necessary to have these replaced.

The next common reason for draughts are the window seals. These can become worn down or damaged over time and will allow air to escape through the gaps. Installing high-quality weatherstripping is a good way to keep draughts at bay. Replace the windows made of upvc with low-emissivity glasses. This will help control indoor temperatures and decrease the possibility of draughts.

The final method to cut down on draughts effectively is by using a Draught-excluder. These are usually fabric tubes filled with a filler, which can be hung over your window sill. These will keep your home warm by blocking cold air.

With a bit of regular maintenance and repair, your upvc windows will continue to provide an excellent level of insulation and security for your home. It is crucial to recognise that windows last for a certain period of time and eventually, they will reach an point at which it is more cost-effective to replace them rather than repair them. If you are experiencing issues with your upvc window, it's best to consult an expert as soon as possible.