• 목록
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC is a great option for modern homes. They are easy to maintain and durable, as well as long-lasting. In contrast to aluminium and timber, they do not rust or rot.

It is essential to clean and oil UPVC doors and windows on a regular basis. This will help avoid unnecessary repair costs as well as improve energy efficiency.

1. Broken Glass

If the glass in your window is damaged, it can cause a great deal of damage to your home, making it very dangerous and potentially fatal. It is important to take the time to make sure that you're doing everything you can to keep your windows in good condition.

For single pane windows, it is fairly easy to replace them, and the new window is usually able to fit into the old frame very easily. If windows with double panes are held together by internal beading, it is harder to remove and replace the old panes. In this case it is essential to purchase plastic spacers to make sure that the new pane fits into the window frame.

If you're planning attempt to remove the glass panes yourself, it is essential to wear the proper safety gear that includes gloves with a thick layer of material and eye protection. You should also lay down a dropcloth prior to you begin working on the window panes so that any shards fall onto the fabric and not onto the floor, where they could be trampled.

It's a good idea to cover the gap with tape after the glass is removed. This will prevent drafts and water from entering your home until a professional is able to fix the window. This will also provide an obstruction to prevent intruders from getting into your home. If the distance between the window and the door is significant, you may need to consider security screens that has a window. This will give you the best of both.

2. Sagging

uPVC windows and doors are an affordable energy efficient, durable and long-lasting alternative to timber windows made of sash. However, with time, they may be afflicted by a variety of issues, including sliding. A window that isn't properly aligned can cause problems with light, draughts, and even security. It is crucial to act immediately if you realize that your uPVC windows are sliding.

To fix a sagging window you can try to reposition the hinges. To do this, you'll have to open the window so that you can access the frame. Then, remove both the hinges on the top and bottom with a screwdriver and adjust them counter-clockwise or clockwise. After you've repositioned the hinges, close your window and check for fitting. If you are happy with the fit of your window, tighten the screws to keep them in the right position.

If you are unable to move the hinges, you might need to replace the seal. As time passes, rubber seals lose their elasticity and become dry, which causes them to lose tightness. If this happens, it's important to replace the seal as soon as you can to ensure that your uPVC windows remain watertight and secure from draughts.

uPVC handles may also loosen up. This is often caused by screws that have loosened over time, but it could also be due to the handle mechanism wearing out. It's fairly simple to repair a loose uPVC handle. You'll first need to close the window and do an experiment fitting. The joints at the corners of the sash must align with the joint on the casing. If it isn't, you can use the screwdriver to loosen the handle. Then, you can turn the mechanism back into place.

3. Water Leaks

It is crucial to take action if get up each morning to discover mouldy walls and floors that are wet. The leaks of water through windows could cause structural damage to your home, and hinder your ability to control the temperature inside your home. Most of the time, uPVC window leaks are caused by damaged or missing sealant.

This is a simple fix that can be done by any DIYer who has the ability. Based on the severity of the issue the old caulking may require removal before a new layer can be put on. It is essential to keep in mind that when it is about uPVC window repairs, do not be tempted to apply too much caulk' as this will only make the area harder to clean and could decrease the efficiency of your energy usage.

Verify that the drainage holes are free of debris inside them and that the sill pan has been angled correctly to drain away from the window. In more serious cases you may need to think about replacing the window.

Other indicators of water leakage include decayed sills and the appearance of black spots of mold on the walls near the window. This mold thrives in damp environments and is able to quickly spread throughout the house.

If the leakage occurs between the double-glazed glass it is more likely that the issue is related to the seal, not the frame. This can be easily repaired by a uPVC window specialist who will replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be at fault for the reason that your uPVC window is difficult to open, or if it opens in a breeze. These are easily repaired by any DIYer who is skilled and can usually be completed in just a few minutes.

Like any mechanical part, hinges can be damaged over time. Changing a window hinge is essentially a simple process, but it's easier to do if you have someone to assist in holding the frame up.

Make sure that the uPVC hinges are open and closed in the proper direction. You can check this by looking for the arrow on each hinge, this indicates the direction in which the window should open.

Faulty window hinges could be caused by improperly opening the window in a particular manner or because of improper installation in the factory. This issue can be fixed by sending us a photograph on our website. We will be more than happy to give you advice.

It is also essential to grease the hinges on a regular basis. Applying a light engineering lubricant to the hinges is a good method of doing this. We recommend using an oil that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication will make the window repair easier to open and close. It can also stop corrosion and reduce the risk of sticking. This should be done at least once a year. WD40 and other solvent based oils are not recommended because they will damage parts of your uPVC window.

5. Draughts

Draughts can be caused by different things. First, the hinges because of wear and tear, could become misaligned. This will cause an opening to appear where the sash joins the frame. This can be easily repaired by giving them good clean, but in the event that they are beyond repair it might be necessary to have them aligned or replaced. The interlock may be disaligned. It is located on the hinge's side and may need to be cleaned. In some instances, it may be necessary to replace them.

These seals are susceptible to wear and tear or become damaged over time, allowing air escape. Replacing these with high-quality weatherstripping will help to prevent draughts. Another alternative is to replace the window with low-emissivity glass, which will help regulate indoor temperatures and again will lessen the possibility of draughts.

Lastly, one of the most effective methods to reduce draughts is by using an draught excluder. These are typically made of fabric that are filled with some kind of filler. They can be put on the top of your windowsill. These will help to stop cold air from entering and keep your home warm and cozy!

With a bit of regular maintenance and repair, your upvc windows will continue to provide excellent insulation and security for your home. However, it is important to recognise that all windows have a lifespan and eventually, they will reach a point where it is more economical to replace them than repair them. If you are experiencing issues with your upvc window you should consult a professional immediately.